| EVERYTHING KIT
Everything you need to get started in Energy Auditing!
Energy auditors, building performance contractors and weatherization crews are asking for a start-up kit which delivers the best "bang for their buck".
Well, here it is! The EVERYTHING KIT exclusively from TruTech Tools!
We have put together premium products from the best manufacturers at an awesome price to get you started. This kit includes a blower door, thermal imager, duct tightness tester, combustion/CO analyzer, gas leak detector and much, much more.
If this kit misses the mark for your situation, give us a call and we will custom design one to fit your needs.
CONSIDER: Leasing this kit to balance your start up cash flow.
testo 875-1i Thermal Imager
More than just pretty pictures, use this thermal imager to quickly spot air leakage and thermal by-passes in the shell during a blower door test. Also, very handy for finding missing or poorly installed insulation. Lightweight, ergonomically designed thermal imager with premium picture quality (160x120 detector with 32 x23 wide angle lens), 5 + hour Li-Ion battery and charger, 2 GB SD card, PC software for downloads and reports, easy menu operation, FAST to learn, USB cable, rugged, waterproof carry case
Q46 Automatic Calibrated Blower Door kit (Q46) with digital manometer for automatic testing
rated for 5800 CFM at 50 Pa: INCLUDES: precision digital manometer (DM-2A) suitable for pressure and flow testing, Fan Bulkhead repair kit, Quick guide, manuals at www.RETROTEC.com/info, model 2200 digital fan set, with 11 ranges, aluminum frame and cloth door with carry case, full tubing accessory kit in protective sheath, rechargeable batteries, charger and USB cable, protective carry case for digital manometer and tubing, Hard Sided Fan Case for Model 2200 Fan, an additional Manual Speed Control for fan- for room by room depressurization testing with Automatic Digital Manometer
Smoke Pencil (air current tester) model S220, use to help fin leaks during a blower door or duct tightness test.
Q32 Automatic Calibrated Duct Tightness Tester (Q32) with digital manometer
rated for 650 CFM at 25 Pa: INCLUDES: digital manometer (DM-2A) included with Duct-tester for full duct test, full tubing accessory kit in protective sheath, rechargeable batteries, charger and USB cable, model DU-220 low flow digital fan set: with 3 ranges, 10 ft. flex duct connection and carry case, 1 roll 12" x 160 ft Hi-stick Grille mask, protective carry case for digital manometer and tubing, manuals at www.RETROTEC.com/info
GR109 1 Case: Three (3) rolls of grille mask (each roll, 12" wide x 12" perfs, 160 feet per roll)
Testo 327 Digital Combustion analyzer (model 327-1):
Digital combustion/CO meter with crucial NOx filter, 12" flue gas probe with 5 foot hose, no case, no printer, 10 spare particle filters, power supply, sensor warranty is 3 years
SENSIT Gas Leak Detector (Model TKX)
High Tech, gas leak detector brand used by most Gas Utilities and Fire Departments, 16" long goose-neck flex shaft, easy to use adjustment dial, 30 hour battery life, find natural gas or propane leaks in seconds.
SENSIT P-100(CO) Personal CO monitor
0-999 PPM with visual, audible and vibrating alert, waterproof, 2 yrs battery life always on protecting you from the hazards of accidental CO poisoning!
Pressure Pan use with a blower Door to identify sir leaks in forced air duct systems
Fluke Non-contact voltage tester: (model 1AC-II) non-contact voltage tester to safely find "hot" wires before they find you, including checking old knob and tube wiring when examining insulation in attics
testo 606-1 Pin Probe moisture meter, simple pin-prick test check to see if moisture is a problem, 7 selectable material scales built in
|
>
