TEC Trainer - Duct and Envelope Simulator

TEC Trainer - Duct and Envelope Simulator - TECTrainer
TruReward$ Points
1200 TruReward$ points will be placed in your account when you buy this item.

TEC Trainer - Duct and Envelope Simulator

Item Id: Tsatectrainer
Your Price:
$1,200.00
Availability: available for orderWhat does this mean?

Choose Options

Close Duct/Envelope OnLine Training

Quantity

Description

New from the Energy Conservatory - The TEC Trainer

Remember to Call for Best Pricing

The TEC Trainer is an excellent way of displaying the setup and operation of the blower door system in a classroom setting. It can also be used to give students some hands on practice setting up and running a blower Door test. Use the DG-700 Simulator software (available from the TEC website www.energyconservatory.com) to project the DG-700 on a screen during your demonstration.

The TEC Trainer can be used to demonstrate 4 different processes including

  • Blower door tests
  • Duct leakage tests
  • Total duct leakage tests
  • Duct leakage to outside tests

Traditional blower door tests can be practiced in the classroom with sliding panels to simulate envelope leakage. Readings change in real time showing students visually what the blower door is measuring.

Duct leakage testing requires installation of the flex duct work assembly that comes with the TEC Trainer.

Tests can be performed by using the blower door to either pressurize or depressurize the trainer enclosure. Blower door tests should typically be done without the flex duct work installed inside the enclosure.

The Total duct leakage test will measure all leaks in the duct system, including leaks inside the enclosure and leaks to outside of the enclosure. This test can be performed both by pressurizing or depressurizing the duct work.

The Duct leakage to outside test will measure only leaks in the duct system that are to outside of the enclosure. This test requires simultaneous use of both the Duct Blaster® and Blower Door systems (sold separately). During the test, a blower door fan is used to pressurize (or depressurize) the enclosure while the Duct Blaster® fan is used to pressurize (or depressurize) the duct system to the same pressure as the enclosure. Because the duct system and the enclosure will be at the same pressure, there will be little or no leakage between the duct system and the enclosure during the test.

The TEC Trainer includes the following

  • Folding frame with carrying case
  • Red nylon cover with adjustable hole sizes
  • Flex duct assembly for duct testing
  • Duct attachment plate for easy connection to the Duct Blaster
  • Zippered access panel
  • Ring C for the Blower Door
  • The hose kit provides all of the color coded, properly sized hoses that you need for testing
  • Gauge bar to hang your Duct Blaster® controller and gauge on the Blower Door frame
  • Complete instruction manual that gives you recommended test configurations and the range of expected results.
  • Carrying case for all parts

Recently Viewed Items

Category