CPS Rapid Recovery Kit - Entry Level
CPS TR600 Pro-Set Oilless Twin Cylinder Refrigerant Recovery Machine 115V 60Hz
The Pro-Set TR600 is a lightweight, efficient and reliable Refrigerant Recovery Machine in a compact, rugged, contemporary housing. The TR600 offers the ideal combination of form and function to make refrigerant recovery fast and easy!
Appion MGAVCT 1/4" Standard Vacuum-Rated Valve Core Removal Tool
Core tools are one of the most important components of a proper evacuation rig. Removing the cores allows for a full unrestricted flow through the service port significantly decreasing both evacuation and or recovery times. Standard core tools are only designed to operate under pressure to allow for the replacement of leaking valve cores without the removal of the refrigerant. Appion core tools are rated for both vacuum and pressure allowing for typical service as well as faster evacuations and recovery. A side port allows for isolation of the hoses for determining the level of vacuum during the evacuation process. Engineered for vacuum, Appion core tools are the best money can buy.
Vacuum rated to 20 microns
Easily remove access valve cores for full, unrestricted flow
Double O-Ring ball valve seal for accurate "blank off" vacuum testing
1/4" side port for vacuum gauges
MegaSeal cap made from aircraft-grade aluminum and molded neoprene gasket, reliably seals under pressure and vacuum
MegaGrip core grip tip for easy, reliable core removal, minimizing lost cores
Machined stainless stem that cannot separate from core tool during service
Appion MH380004AAY 3/8” Dia. Hose, 4-foot, 1/4”FL to 1/4”FL Yellow
Vacuum-certified MegaFlow Hoses are ultra-flexible and ultra-reliable, with larger interior diameter for high speed recovery and evacuation.
Features and Benefits:
- Vacuum rated to 20 microns
- Larger interior diameter for superior performance
- Rated for use with R410A and all common refrigerants
- All hoses are available in custom length, color, and fitting combinations
- Every hose is tested and evacuated before shipping
- Ultra-flexible for easy connections in tight spaces
- 4000 psi burst and 800 psi working pressure for 1/4" and 3/8" hoses
- 3200 psi burst and 640 psi working pressure for 1/2" hoses
Larger Hoses for System Evacuation
Even when restricted by 1/4" system ports, using a 3/8" or 1/2" hose greatly reduces resistance and increases potential flow. This is especially true during system evacuation. Just using one 1/2" hose with 1/4" fittings can result in one tenth the evacuation time compared to one 1/4" hose.
Or look at it the other way: using 1/4" hose can make an evacuation take up to 10 times longer than when using 1/2" hoses!
CPS CRX430T Recovery Tank 30lb 400 PSIG
D.O.T. approved 30lb recovery tank with ¼" SAE male fittings.
- Water Capacity: 26.2lb / 11.9kg
- DOT Specification: DOT04BA-400
- Service Pressure: 400 PSIG
Appion KTF032 Filter Dryer Kit (Size 032 Filter and 6" Adapter Hose)
For use with Appion G1 and G5 Recovery Units.