Cool Air Fix Quick Ultra-fast UV Fluorescent Leak Stop
FIXQUICK is the new ultra-fast Leak Stop by
Errecom, specifically formulated to repair in max
30 seconds leaks up to 1 mm in diameter on flat
and curved surfaces. It guarantees a seal up to 50
Bar pressure and 250°C. It can be used on metals
and plastic materials used in vehicle A/C systems.
Its fluorescent formulation allows to easily check
the status of the performed fixing using a UV lamp
and to identify any previous repairs.
How does it work?
The product can be applied both on a curved and
flat surface, which must be perfectly dry
and clean. Apply in sequence on the leakage area the STEP1
liquid product, then STEP2 powder and
again STEP1 to make the fixing uniform.
Wait 20 seconds for a repair that can withstand a
pressure of 20 Bar or 20 min to withstand
a pressure of 50 Bar.
It can be used both on metals and plastic
materials. It can be used on flat or curved
surfaces. In 20 seconds it seals the leak resisting
to a pressure up to 20 Bar. In 20 minutes
it seals the leak resisting to a pressure
up to 50 Bar. It resists up to 250 °C. It is
visible with UV lamp.
Apply the product on a perfectly dry and clean surface. It is recommended t0
clean the area with sandpaper. Remove any residuals that could affect
Apply the STEP1 liquid product on the leaking area and the around surface without pressure.
Apply the STEP2 powder on the surface just treated creating a thin layer.
Apply once again the STEP1 liquid product to obtain a homogeneous preparation.
Wait 20 seconds for a repair that can withstand a pressure of 20 Bar (290 Psi) and 20 min (at standard room-temperature of 20°C) to withstand a pressure of 50 Bar (725 Psi) and 480°F.