Fieldpiece JL3RH Flex Psychrometer Probe

Part Number: JL3RH

On Sale: ~~$135.00~~ $114.75

Your Savings:$20.25(15%)

in stock

Quantity

Questions about this item? Ask here.

Description
Questions and Answers
Specs
Videos
Resources
Software / App

Fieldpiece JL3RH Flex Psychrometer Probe

The Fieldpiece JL3RH Job Link Flex Psychrometer Probe with Remote Data Logging sends air measurements directly to the Fieldpiece Job Link app up to 350' away. The JL3RH Job Link Flex Psychrometer Probe with Remote Data Logging measures %RH, dry bulb, wet bulb, dew point, and enthalpy at a register/grille, in the duct, or just walking around. Bend the flexible probe and slide the magnet to conveniently configure the JL3RH Job Link Flex Psychrometer Probe with Remote Data Logging to your situation. The rubberized protective housing of the JL3RH Job Link Flex Psychrometer Probe with Remote Data Logging is both ergonomic and rugged for daily use. Flip the switch and the Job Link app immediately knows which side of the system you're going to place your JL3RH Job Link Flex Psychrometer Probe with Remote Data Logging. Use the JL3RH Job Link Flex Psychrometer Probe with Remote Data Logging for its long wireless range, strong magnet, and flexible probe for quick and easy psychrometrics testing.

Features:

LED color indications
High or low side switch
Rapid Rail sensor advantage
Remote data logging
Auto power off (APO)

Learn more with this Job Link How To's video playlist.

Q: I want to purchase two Fieldpiece air probes. One for supply and one for return, one is marked blue and one is marked red. How can I be sure I am ordering one of each?

Asked by: Joel Johnson - 9/28/2020

A: Hello,

On the actual JL3RH probe there is a slider on the back, you slide it to either Supply or Return. This indication is then fed to the Fieldpiece Job Link app or the measureQuick app, whichever one you prefer to use. What we've seen is customers putting red or blue tape on the probe they intend to use for Supply or Return. However, you can always use the probe for Supply or Return.

Thanks!

Was this answer helpful? 0 of 0 Customer(s) found this Answer helpful.

Answer provided by: Billy Spohn (9/28/2020)

Submit an answer

Q: Are these the same probes that come in the Black kit with the line clamps and pressure resistors?

Asked by: Michael Grissom - 10/12/2020

A: Hello,

Yes, these are the same probes that come in the JL3KH6 kit that comes with additional clamp probes and pressure probes.

Thank you!

Was this answer helpful? 0 of 0 Customer(s) found this Answer helpful.

Answer provided by: Billy Spohn (10/12/2020)

Submit an answer

Q: I need 2 cases for the JLC RH pyscrometers what is the PN so when I order a 2nd one , I cann order these.

Asked by: Bruce Bickel - 10/14/2020

A: Hello,

The part number for the single meter case from Fieldpiece, that can fit about 3 Job Link probes, is ANC7, link here: https://www.trutechtools.com/ANC7

Thank you!

Was this answer helpful? 0 of 0 Customer(s) found this Answer helpful.

Answer provided by: Billy Spohn (11/13/2020)

Submit an answer

Q: If I buy two of these will I be able to use them at the same time on the app and label one for return and one for supply so I can check the temperature difference?

Asked by: Alex - 11/10/2020

A: Hello,

Yes, on the back of the Job Link probes is a slider where you slide the button to either Supply or Return. This label is then sent to the Job Link or measureQuick app and the probes are identified by their 4 digit serial number.

Thanks!

Was this answer helpful? 0 of 0 Customer(s) found this Answer helpful.

Answer provided by: Billy Spohn (11/13/2020)

Submit an answer

Questions about this item? Ask here.

115 TruReward$ points will be placed in your account when you buy this item.

Minimum Device Requirement:	BLE 4.0 devices running iOS 7.0 or Android 5.0
Battery Type:	2 x AAA, NEDA 24A, IEC LR03
Battery Life:	150 hours typical alkaline (LED blinks red when battery replacement is needed)
Auto Power Off:	2 hours (APO can be disabled)
Wireless Range:	350 feet (107 meters) line of sight (obstructions affect distance)
Radio Frequency:	2.4 GHz
Operating Environment:	32°F to 122°F (0°C to 50°C) at <75% RH
Storage Temperature:	-4°F to 140°F (-20°C to 60°C), 0 to 80% RH (with batteries removed)
Temperature Coefficient:	0.1 x (specified accuracy) per 0.6°F (32°F to 64°F, 82°F to 122°F), per 1°C (0°C to 18°C, 28°C to 50°C)
Weight:	0.33 lbs (150 g)
Flexible Probe:	0.36" (9mm) diameter; 9.25" (235mm) length
Relative Humidity (%RH):	Sensor Type: Capacitance polymer film Hysteresis: ±1%RH typical (Excursion of 10% to 90% to 10%RH) Measurement Range: 0%RH to 100%RH Accuracy: (At 73.4°F (23°C)) ±2.5% (10%RH to 90%RH); ±(5%) <10%RH, >90%RH Response Time: 60 seconds typical for 90% of total range
Temperature:	Sensor Type: Precision thermistor Measurement Range: -4°F to 140°F (-20°C to 60°C) Accuracy: ±(1°F) 32°F to 113°F, ±(0.5°C) 0°C to 45°C; ±(2°F) -4°F to 32°F, 113°F to 140°F, ±(1°C) -20°C to 0°C, 45°C to 60°C

Fieldpiece JL3RH Flex Psychrometer Probe

Fieldpiece JL3RH Flex Psychrometer Probe

Features:

Q: I want to purchase two Fieldpiece air probes. One for supply and one for return, one is marked blue and one is marked red. How can I be sure I am ordering one of each?

Q: Are these the same probes that come in the Black kit with the line clamps and pressure resistors?

Q: I need 2 cases for the JLC RH pyscrometers what is the PN so when I order a 2nd one , I cann order these.

Q: If I buy two of these will I be able to use them at the same time on the app and label one for return and one for supply so I can check the temperature difference?

JL3RH Manual

TruReward$ Points

Browse Similar Items