Fluke T6-1000 Electrical Tester with Fieldsense

Fluke T6-1000 Electrical Tester with Fieldsense

Measure voltage … without test leads

We know working in electrical boxes jammed with wires can be challenging when you’re trying to find a safe metallic contact point. Now, with Fluke’s T6-600 or T6-1000 with integrated FieldSense technology, you can quickly and easily take measurements by sliding the open fork over a conductor to see the voltage level without the need for test leads.

Key Features:

• Be safer: Measure voltage to 1000 V ac through the open fork, without test leads.
• Be faster: No need to open covers or remove wire nuts.
• Be more efficient: Simultaneously measure voltage and current.
• Be everywhere: 17.8 mm open fork is widest in the industry; measure up to 200 A on 4/0 wires (120 mm2).
• Go beyond simple detection. Actually measure ac voltage and current values without test leads.

Why use the T6 Electrical Tester?

Electricians often work in boxes jammed with wires, where finding a safe metallic contact point can be a challenge. With the T6-600 or T6-1000 you take measurements by sliding a single wire into the open fork.

How FieldSense Works

FieldSense technology is truly a breakthrough in how voltage is measured. While other open fork testers detect a magnetic field to show ac current, FieldSense technology detects an electrical field. This field interacts with a reference signal created by the T6 tester, creating a voltage value on the tester’s display.

Who needs a T6 tester?

Commercial and light industrial electricians can use T6 Electrical Testers for most everyday measurements. These devices easily fit in your pocket, making them easy to access on the front-line for electricians of all industries. Measure voltage up to 1000 V ac through the open fork, without test lead contact to live voltage.+ Without opening covers or removing wire nuts. On wires up to AWG 4/0 (120 mm2), carrying as much as 200 A. It will change your job. Safer. Faster. Easier.

• FieldSense technology for ac voltage, current and frequency measurement without making electrical contact to live voltage
• Simultaneous voltage and current display – shows all power supply measurements at a glance for efficient trouble shooting
• 1 to 1000 V AC or DC (T6-1000)
• 0 to 200 A AC
• True-rms voltage and current
• Resistance 1 Ω to 100 kΩ
• Frequency measurement 45 Hz to 66 Hz
• Works with wires up to AWG 4/0 (120 mm2) with a 17.8 mm jaw opening
• HOLD button temporarily freezes the reading for easy viewing
• Easy to read display with backlight
• Accepts optional Fluke TPAK Magnetic Meter Hanger for convenient operation