Q: Does this set of probes work with Measure Quick app?

Asked by: Chris - 10/8/2018
A: Hi Chris,

This JobLink Kit does indeed work with MeasureQUICK. MeasureQUICK and Fieldpiece Job Link probes started working together around September 2018.

Thanks!
Was this answer helpful?  13 of 15 Customer(s) found this Answer helpful.
Answer provided by: Billy Spohn (10/31/2018)

Q: whats the warranty?

Asked by: Shawn Souther - 9/4/2017
A: Hi Shawn,

The JobLink Kit has a 1 year warranty good from the day the kit was purchased. If you have any questions regarding the warranty status of your product, please call Fieldpiece directly at 714-634-1844.

Thanks!
Was this answer helpful?  4 of 6 Customer(s) found this Answer helpful.
Answer provided by: Billy Spohn (10/31/2018)

Q: Do these gauges give you troubling?,does it tells you what's wrong with the system,and how to fix it?

Asked by: Carl Ford - 10/10/2017
A: Hi Carl,

There is a troubleshooting feature within the app, but it doesn't really tell you exactly how to fix the issue. The troubleshooting portion will give you suggestions as to why you might be seeing a particular issue, i.e. high pressure low superheat.

Thanks!
Was this answer helpful?  4 of 6 Customer(s) found this Answer helpful.
Answer provided by: Billy Spohn (12/3/2018)

Q: Does this require the job link app transmitter also or is this all bluetooth?

Asked by: DAVID PETERSEN - 11/12/2017
A: Hi David,

For the Fieldpiece JobLink Smart Probes you will not need the JL2 Wireless Transmitter.
The JobLink Smart Probes in this kit work directly with your bluetooth enabled smart phone or tablet.

Thanks!
Was this answer helpful?  3 of 5 Customer(s) found this Answer helpful.
Answer provided by: Billy Spohn (5/21/2019)

Q: Dose this measure in microns also?

Asked by: Junior Rojas - 5/24/2020
A: Hello,

The JL3PR Pressure Probe in this kit does not measure in microns. It measures in psig or kPA, 0 - 580 psig (0 to 4000 kPa).

There is also no micron gauge in this kit. Fieldpiece makes a micron gauge, the SVG3: https://www.trutechtools.com/SVG3

Thank you!


Was this answer helpful?  3 of 5 Customer(s) found this Answer helpful.
Answer provided by: Billy Spohn (5/26/2020)

Q: How big is the case? Can it hold 3 clamps, 3 pressure transducers and 3 psychrometes?

Asked by: chris camilletti - 9/7/2019
A: Hello,

The case in this kit will absolutely fit 3 clamp probes, 3 pressure probes and 3 psychrometers. However, all 9 probes fit pretty snug, so there is not much room for anything else.

Thank you!
Was this answer helpful?  2 of 5 Customer(s) found this Answer helpful.
Answer provided by: Billy Spohn (9/30/2019)

Q: hello can I still get the charging tees for free with my purchase of fieldpiece JL3KH6?

Asked by: jose mariano - 7/11/2020
A: Hello,

We are still running the free tees with the purchase of a Fieldpiece JL3KH6 kit for the foreseeable future.

Thank you!

Was this answer helpful?  2 of 3 Customer(s) found this Answer helpful.
Answer provided by: Billy Spohn (7/13/2020)

Q: Are the pipe clamp probe sensors thermistors or thermocouples, or something totally different? The stated 1* F +/- tolerance seems tighter than any normal thermocouple sensors.

Asked by: Chuck DeArruda - 5/7/2018
A: Hi Chuck,

The JL3PC Pipe Clamp JobLink Probe uses a beaded thermocouple for its measurements.

The probe will blink if the connection to the pipe you are measuring is not sufficient.

Thanks!
Was this answer helpful?  1 of 3 Customer(s) found this Answer helpful.
Answer provided by: Billy Spohn (5/21/2019)

Q: Does it measure super heat?

Asked by: Daniel Urcadiz - 12/1/2018
A: Hi Daniel,

This JL3KH6 JobLink Kit is perfect for finding your superheat and subcooling measurements!

Thanks!
Was this answer helpful?  1 of 3 Customer(s) found this Answer helpful.
Answer provided by: Billy Spohn (5/21/2019)

Q: What is the largest pipe size the clamps will work on?

Asked by: Erik - 7/11/2020
A: Hello,

The Pipe Clamp probes in this kit will work with pipe sizes between 1/4" to 1 3/8".

Thanks!


Was this answer helpful?  1 of 2 Customer(s) found this Answer helpful.
Answer provided by: Billy Spohn (7/13/2020)

Q: Will this set work with the Measure quick app?

Asked by: Matt K. - 9/13/2020
A: Hello,

All Fieldpiece Job Link probes will work and connect with measureQuick and the Fieldpiece Job Link app.

Be sure you have the most up to date firmware for your measureQuick or Job Link apps and be sure your firmware is up to date for the Job Link probes themselves.

Thank you!

Was this answer helpful?  0 of 1 Customer(s) found this Answer helpful.
Answer provided by: Billy Spohn (9/14/2020)