Description
UEI C161OILKIT Residential Combustion Analyzer for Gas & Oil-Fired Appliances with Printer
Don't miss out on the great benefits of UEi Service+.
Register your combustion analyzer with UEi and get notified when its time to recertify.
Backed by UEi Service+ to allow up to 10 years' warranty, same day recertification and a reduced cost of ownership. The C161OILKIT Residential Combustion Analyzer is easy to use with a rugged design, multiple sensor protections, and altitude compensation. Prints to included printer. Essential information for installing and maintaining gas and oil-fired appliances. With a Smoke Pump Test Kit.
C161 has two types of sensor protection; a NOx filtered CO sensor and Low Flow Detection. It also has sensor technology that reduces the cost of ownership, a Heat Exchanger test to check the exchanger integrity, and differential temperature. The C161 comes with high altitude compensation to maintain accurate readings at any altitude, auto-purge shut off, and 8 Pre-programmed fuels including Natural Gas and Propane.
The C161 has a 6-Line display to view readings on one screen, which is a favorite among technicians. The DMM Style dial makes it easy to select the test needed. It also features a water trap to protect the sensor with a check light to remind to look for condensate built-up, a magnetic boot for hands-free operations, and an IR printer port to print to included printer, making it easy to document test results for later analysis.
NOTE: CO-AirFree (COa) Calculation can be set to be displayed in the AUX screen.
Product Features & Functions:
- Up to 6 Year warranty with annual recertification
- 2 Types of Sensor Protection
- NOx Filtered
- K-Type Temperature Inputs
- CO-AirFree (COa) Calculation
- Low Flow Detection
- Temp differential
- 6 line backlit display
- 8 Preprogrammed Fuels
- 30 second start time
- High altitude compensation
- 45 Memory Positions
- Protective Water Trap
- Automatic fresh air purge
- Magnetic mount
- IR printer link (Printer included)
UEi Combustion Analyzer Comparison
Specs
| Temperature Measurement | |||
|---|---|---|---|
| Parameter | Range | Resolution | Accuracy |
| Flue Temperature | 32° to 1112°F (0° to 600°) | 0.1°F (0.1°C) | ±0.5°F (0.5°C) |
| Inlet Temperature (Internal Sensor) | 0.1°F (0.1°C) | ±1°F (1°C) | |
| Inlet Temperature (External Sensor) | 32° to 1112°F (0° to 600°) | 0.1°F (0.1°C) | ±0.5°F (0.5°C) | Flue Gas Measurement |
| Parameter | Range | Resolution | Accuracy |
| Carbon Monoxide | 0 to 2000 ppm | 1 ppm | ±3 ppm or ±5% rdg (whichever is greater |
| (Optional H2 Compensated (if Applicable)) | 2000 to 10000 ppm | 1 ppm | ±10% rdg |
| Carbon Dioxide | 0 to 20% | 0.1% | ±0.3% volume | Calculations |
| Parameter | Range | Resolution | Accuracy |
| Oxygen | 0 to 21% | 0.1% | ±0.3% volume |
| Efficiency (Net or Gross) | 0 to 99.9% | 0.1% | ±1% rdg |
| Efficiency High (C) | 0 to 119.9% | 0.1% | ±1% rdg |
| Excess Air | 0 to 119.9% | 0.1% | ±0.2% rdg |
| CO/CO2 Ratio | 0 to 0.9999 | 0.0001 | ±5% rdg |
| CO-AirFree (COa) | 0 to 9999 PPM | 1 PPM | ±5% rdg | General |
| Preprogrammed Fuels | Pellets, Light Oil, LPG, Butane, Propane, Natural Gas, Bio Oil, Heavy Oil | ||
| Battery Life | >8 hours (continuous with pump on) | ||
| Certification | The C160 Series is TUV-tested and certified to EN 50379, Parts 1-3 in accordance to 1st German Federal Emission Control Ordinance (BimSchV) | ||
| Operating Temperature | 32° to 113°F (0° to 45°C) | ||
| Operating Humidity | 15% to 90% R.H. | ||
| Power Supply | Rechargeable Batteries, USB Charging | ||
| Dimensions | 8.54" x 4.18" x 1.86" | ||
| Weight | 1 lb., 5.1 oz. | ||
Includes
- (1) UEI C161 Flue Gas Combustion Analyzer
- (1) Flue Probe w/ Cone & Hose
- (1) Smoke Pump Test Kit
- (1) IR Printer and paper
- (1) Hard Case
- (3) AA Rechargeable Batteries
- (1) USB Charging cable
- (1) Quick Start Guide
Videos
UEi C161 Combustion Analyzer Manual